Flooring Installation in Houston, TX
Silverheels Construction installs vinyl plank, tile, laminate, and hardwood across the Houston area, including the subfloor repair that older homes and water-damaged floors usually need first. We check what's under the old floor before quoting, because that's where flooring budgets go sideways. Free estimates.
Get a free estimate
Tell us about your project — it takes under a minute.
- 1Service
- 2Timeline
- 3Budget
- 4Your details
Flooring in Houston has to survive humidity. Indoor moisture stays high here for most of the year, slabs hold moisture from the clay underneath, and any water event - a burst supply line, a roof leak, a storm - reaches the floor. That's why luxury vinyl plank has taken over so much of this market and why solid hardwood struggles in places it does fine elsewhere. We install flooring for Houston homeowners, landlords, property managers, and commercial spaces, and we look at the subfloor before quoting rather than discovering it on install day.
What we install
Luxury vinyl plank (LVP) and LVT: the default for most Houston homes now. Waterproof, stable in humidity, tolerant of minor subfloor imperfection, and priced well. It's what we recommend for rentals, turnovers, and anywhere that's had water before.
Tile: ceramic and porcelain. The most durable option and the best in wet areas, but the most labor-intensive to install and the most expensive to remove later.
Laminate: budget-friendly and good-looking, but it swells if water sits on it. Fine in bedrooms and living areas, a bad idea in bathrooms, laundry rooms, or anywhere prone to leaks.
Engineered wood: handles Houston humidity far better than solid hardwood because of how it's layered.
Commercial: glue-down and peel-and-stick vinyl, VCT, LVT, and carpet tile for offices, retail, and warehouse space.
We also do removal and haul-off, transitions, and baseboard.
What flooring costs in Houston
Installed, in the Houston market: Luxury vinyl plank generally runs about $4 to $8 per square foot. Laminate is similar or slightly less. Tile generally runs about $7 to $14 per square foot depending on tile size, layout, and how much cutting is involved. Engineered and solid wood run higher and vary widely by species. For a 500 square foot area, LVP typically lands somewhere in the $2,000 to $4,000 range.
What moves your number: removal and disposal of the old floor (tile is slow and expensive to take out, carpet is fast), subfloor condition, layout complexity - diagonal and herringbone patterns waste more material and take longer - transitions and baseboard, and furniture that has to be moved.
These are ranges, not quotes. We price after seeing the space.
The subfloor is where budgets change
This is the part that turns a simple flooring job into a bigger one, and it's why we look before quoting. On slab homes: cracks and unevenness that need grinding or self-leveling compound, and moisture coming up through the slab that requires a barrier. Houston's humidity and clay soil make both common. On pier and beam homes - the Heights, Montrose, Garden Oaks, Oak Forest, and older neighborhoods generally - soft or rotted subfloor, sagging between joists, and joist damage from moisture in the crawl space.
Anywhere water has been, whether from flooding, a plumbing failure, or a slow leak, the subfloor has to be checked and dried before new flooring goes down. Installing over a wet subfloor traps the moisture and the new floor fails from underneath. We tell you what's down there before you commit to a number.
Choosing for Houston specifically
If the space has flooded or could flood, use LVP or tile. Not laminate, not solid hardwood.
If it's a rental or turnover, LVP wins on cost per year - it survives tenants and it's fast to replace one room at a time.
If it's a wet area, tile is still the most durable answer.
If you want the look of wood, engineered handles Houston humidity far better than solid.
Material acclimation matters here more than in drier climates. Flooring brought in from a cold truck and installed the same day in a humid house will move afterward.
Rentals, turnovers, and commercial
A lot of our flooring work is unit turnovers on a deadline and commercial spaces that need to reopen. For rentals, LVP in a consistent color across a portfolio means damaged rooms get swapped without re-flooring the whole unit and without matching problems. For commercial, glue-down and peel-and-stick go in faster and take more traffic than click-lock, and we can schedule around operating hours so the space stays usable.
Frequently asked questions
How much does flooring installation cost per square foot in Houston?
Luxury vinyl plank generally runs $4 to $8 per square foot installed, tile $7 to $14, and wood higher depending on species. Removal of the old floor, subfloor repair, and layout complexity all move the number. We quote after seeing the space.
What's the best flooring for Houston humidity?
Luxury vinyl plank for most rooms - it's waterproof and stable. Tile for wet areas. Engineered wood if you want real wood. Solid hardwood and laminate are the two that give people trouble here.
Do you have to replace the subfloor?
Sometimes. On slab homes it's usually leveling and moisture control rather than replacement. On pier and beam homes, and anywhere water has sat, sections of subfloor often do need replacing. We check before quoting so it isn't a surprise.
Can you install over existing tile?
Sometimes, if the tile is sound, level, and the added height doesn't create problems at doors and transitions. Often removal is the better answer. We'll tell you which applies.
How long does flooring installation take?
A standard room or two is typically one to three days. Whole-home jobs run longer, and subfloor repair or leveling adds time. We give a realistic window with the estimate.
Do you move furniture?
We can. It affects the price, so tell us up front what's in the space rather than on the morning of the install.