Commercial Flooring Installation in Houston, TX

What commercial flooring we install

The workhorses of commercial flooring, and where each one fits:

VCT (vinyl composition tile): the classic low-cost commercial floor — schools, back-of-house, medical corridors. Cheap per square foot, endlessly repairable one tile at a time, and it takes a buff-and-wax finish. LVT and LVP (luxury vinyl tile and plank): the current standard for offices and retail that want a wood or stone look with commercial durability. Carpet tile: the default for open offices and conference rooms — quiet underfoot, and a stained tile pops out and gets replaced instead of re-carpeting the room. Commercial vinyl sheet: seamless and water-resistant where spills matter.

We help you match the material to the room and the traffic rather than to a brochure. A busy retail entry, a quiet office, and a warehouse mezzanine each want a different floor, and the cheapest option installed in the wrong spot is the most expensive one over five years.

Glue-down and peel-and-stick flooring installation

Most commercial flooring is a glue-down job, and glue-down flooring installation lives or dies on prep. The adhesive only holds if the slab is clean, flat, and dry — so we grind or skim high and low spots, scrape off old adhesive, and let moisture testing pass before the trowel comes out. Done right, a glued floor stays flat and quiet under carts and chairs for years.

Peel-and-stick flooring installation — self-adhesive LVT and tile — is faster and works well for smaller areas and quick turnovers, but it's even less forgiving of a dirty or uneven slab, because there's no wet adhesive to bridge imperfections. Whichever method the product calls for, the subfloor prep is the part that makes it last, and it's the part we don't skip to save a day.

Office, retail, and warehouse flooring installation

Office flooring installation is usually carpet tile and LVT, and the real constraint is the furniture and the people — we lift and set workstations, cut in around the maze, and phase the work so departments keep operating. Retail flooring installation is about the sales floor: a look that reads clean under store lighting, transitions that don't trip anyone, and a schedule that protects your selling hours.

Warehouse floor coating is a different animal — here it's about protecting and sealing the concrete against forklift traffic, dropped loads, and dust, with a coating that stands up to wheels and chemicals. We prep the slab, patch the gouges, and roll or squeegee the coating in sections so the floor is back in service on a schedule that fits your operation.

Commercial flooring removal and subfloor prep

Commercial flooring removal is half the job and all of the mess. Old glued VCT, sheet vinyl, and carpet tile come up with scrapers and ride-on strippers, and the adhesive residue underneath has to come off too — a new floor bonded over old glue is a new floor that fails. We haul the old material off and leave the slab ready to bond.

Then the prep: grinding the slab flat, filling low spots with patch, and moisture-testing before anything new goes down. This is the invisible work that decides whether the finished floor lies flat and stays stuck, and it's why we quote removal and prep as their own line items — so you can see what you're paying for instead of finding it in a change order once the old floor is up.

What commercial flooring costs in Houston

Rough installed ranges in the Houston market: VCT runs about $3 to $7 per square foot, carpet tile about $4 to $9, LVT and LVP about $5 to $12, and warehouse floor coatings vary widely with the system and the slab condition. Tear-out of the old floor and any needed slab grinding or patching are additional, and on an occupied space, after-hours or phased work carries a labor premium for the off-hours.

These are ranges to plan around, not a quote. What moves your number: the material, how much old flooring has to come up, how bad the slab is once it's exposed, and how much of the work has to happen around your hours. We give you a real number after we see the space, with removal, prep, and install broken out.

Working around your hours

The thing that makes commercial flooring different from a house is that the space is usually in use — a store selling, an office working, a warehouse shipping. So the schedule is part of the scope. We can work after hours and on weekends, or move through the space in phases so one area stays open while another gets floored.

We protect the parts of the space that stay in service, keep the dust contained, and time the disruptive steps — tear-out and grinding — for when the fewest people are around. The goal is a floor that looks like it was always there and a business that barely felt it get installed. Free estimates, and we'll build the phasing into the plan before we start.